The Role of Thermal Control Techniques in Robotic Spacecraft
Introduction:
The use of the Thermal Control System is controlled by the technical or functional limitations and compatible sources of all the devices used for a spacecraft and, in the case of controlled missions, by the need to supply the crew with suitable working surroundings. Almost all complicated equipment has specified temperature ranges in which it will function rightly. Thermal Control System is to maintain the temperature and stability of temperature of every item in the spacecraft within those predefined limits for all mission parts and it using a small amount of spacecraft resources [Gilmore, D.G., 1994].
The environmental Interaction:
The outer layer of a spacecraft need secure from the local environment and improved interaction with it, it involves:
· The increment of reduction absorbed by environmental fluxes.
· The increment or reduction of heat losses to the environment.
Heat provision and storage:
In some of cases, to maintain the good temperature level and it has to be supplied AND/OR a proper storage capability of heat has to be informed.
In some of cases, to maintain the good temperature level and it has to be supplied AND/OR a proper storage capability of heat has to be informed.
Heat collection:
In many of cases, dispersed the heat has to be removed from the device in which it is generated to avoid an unwanted increment in the unit's, AND/OR the spacecraft's temperature.
In many of cases, dispersed the heat has to be removed from the device in which it is generated to avoid an unwanted increment in the unit's, AND/OR the spacecraft's temperature.
Heat transport:
In general, it is impossible to avoid the heat directly where it is generated, and right means have to be used to pass the heat from the collection equipment to the radiating equipment.
In general, it is impossible to avoid the heat directly where it is generated, and right means have to be used to pass the heat from the collection equipment to the radiating equipment.
Heat rejection:
The collection and transportation of heat has to be avoided at a suitable temperature to a heat sink, which is usually the surrounding of the space environment. The avoidable temperature depends on the amount of heat involved, the temperature to be controlled and the temperature of the environment into which the device send outs the heat [Donabedian, M., 2002].
The collection and transportation of heat has to be avoided at a suitable temperature to a heat sink, which is usually the surrounding of the space environment. The avoidable temperature depends on the amount of heat involved, the temperature to be controlled and the temperature of the environment into which the device send outs the heat [Donabedian, M., 2002].
The designing phase:
some parameters used in the designing process of Thermal Control System. There are,
some parameters used in the designing process of Thermal Control System. There are,
- the environment used for spacecraft has to operate
- the total amount of heat dispersed on board the spacecraft
- the distribution of the thermal dispersed inside the spacecraft
- the temperature of heat requirements of the differ equipment items
- the configuration of the spacecraft, and its verification and reliability requirements [Karam, R.D., 1998]
The environment of Thermal control techniques:
for all the spacecraft, the incoming energy from the Sun and the heat send outs to deep space are usually the major environmental interactions. Depends on the spacecraft's attitude and orbit, other parameters can have a major influence on the thermal control design. For sample, the type of the attitude stabilization used can affect the TCS design. In general, spin stabilization is more benign, as the rotation cause to an average of the flux inputs. Three axis stabilized spacecraft needs a greater protection against short term differs in energy input from the Earth or Sun [Martinez, I., 1992].
for all the spacecraft, the incoming energy from the Sun and the heat send outs to deep space are usually the major environmental interactions. Depends on the spacecraft's attitude and orbit, other parameters can have a major influence on the thermal control design. For sample, the type of the attitude stabilization used can affect the TCS design. In general, spin stabilization is more benign, as the rotation cause to an average of the flux inputs. Three axis stabilized spacecraft needs a greater protection against short term differs in energy input from the Earth or Sun [Martinez, I., 1992].
Special orbits:
The design of the missions for the long term observation of the particular phenomena need a fixed, stable environment and to make use of stable orbits needs the low station keeps the requirements, far away from any celestial body. Scientific spacecraft like as scientific mission of SOHO and COBRAS SAMBA, are good kind of the class of the mission. The spacecraft is the Sun pointed and have one side fixed illuminated and all other faces are opened to deep space. Serially, the Thermal Control System design can be optimized likely to be easily and there are very special temperature requirements for insufficient electrical power for the heaters [Wertz, J.R., 1999].
The design of the missions for the long term observation of the particular phenomena need a fixed, stable environment and to make use of stable orbits needs the low station keeps the requirements, far away from any celestial body. Scientific spacecraft like as scientific mission of SOHO and COBRAS SAMBA, are good kind of the class of the mission. The spacecraft is the Sun pointed and have one side fixed illuminated and all other faces are opened to deep space. Serially, the Thermal Control System design can be optimized likely to be easily and there are very special temperature requirements for insufficient electrical power for the heaters [Wertz, J.R., 1999].
Deep space and planetary exploration:
This class of mission includes most number of various sub scenarios depending on the particular celestial body. In General, the mission duration and the need for high intensive thermal conditions, like as cruises it’s very close or far away from the low orbiting of the sun and very hot or very cold celestial bodies and descents through the hostile of atmospheres, and survival in the high intensive environments on the surfaces of the bodies visited. The challenge for the Thermal control system is to provide enough rejection of heat capability during the hot acting parts and still the survive the cold inactive ones. The major problem is often the provision of the power and energy required for that survival part [Fortescue, P., 2003].
This class of mission includes most number of various sub scenarios depending on the particular celestial body. In General, the mission duration and the need for high intensive thermal conditions, like as cruises it’s very close or far away from the low orbiting of the sun and very hot or very cold celestial bodies and descents through the hostile of atmospheres, and survival in the high intensive environments on the surfaces of the bodies visited. The challenge for the Thermal control system is to provide enough rejection of heat capability during the hot acting parts and still the survive the cold inactive ones. The major problem is often the provision of the power and energy required for that survival part [Fortescue, P., 2003].
Current techniques of TCS:
The external environmental Interaction
Coatings:
The easy way to modify a surface's behavior is to coat it with paint or a layer of other suitable material. All spacecraft makes many different types of coatings, ranging from likely simple to apply paints for complicated in physically or chemically produced the good looking coatings. Coatings are characterized with the properties of thermo optical system is emissivity, absorptive, transparency and reflectivity.
Coatings:
The easy way to modify a surface's behavior is to coat it with paint or a layer of other suitable material. All spacecraft makes many different types of coatings, ranging from likely simple to apply paints for complicated in physically or chemically produced the good looking coatings. Coatings are characterized with the properties of thermo optical system is emissivity, absorptive, transparency and reflectivity.
The disadvantages of the coatings are the degeneration caused by the environment of operation and the introduction of space operations, or ground handling and the absorptive parameter was affected. Both the handling on the space environment and the ground tend to increase the absorptive process of coating. The duration of timeline spent in orbit, the orientation and relevant environment of the surface of the spacecraft [Griffin, M.D., 1991].
The provision of Heat:
Electrical heaters:
Electrical heaters are the means of providing heat to spacecraft device. The storage functions and provision are separated in that the former is performed by the Thermal control system, after that it is provided from the power subsystem.
Electrical heaters:
Electrical heaters are the means of providing heat to spacecraft device. The storage functions and provision are separated in that the former is performed by the Thermal control system, after that it is provided from the power subsystem.
The heaters can be powered for usually and continuously, it can be switched on and off according to the degree of temperature of the controlled equipment. After that, it is possible to have local control by thermostats or central control through a dedicated switching unit. This implies the use of temperature sensors and data and commanding codes. Depend upon the particular spacecraft temperature and configuration requirements, the monitoring and commanding system of this heater can become quite difficult. The major disadvantages of heaters are needs the electrical energy and the complexity of DHS or reduced the reliability.
Electrical heaters are used on all the spacecraft. Recently, the heaters from Europe have been qualified for ESA specification for both single and double density designs [Tribble, A.C., 1995].
The collection and transportation of heat: The components and systems depend on the power density, the level of power, and the degree of temperature requirements for collection and transportation of heat.
Mechanical elements for TCS:
In general, collection of the heat dispersed by any type of device through its fixation elements and baseplate. With increasing power dissipation, the complete baseplate has to be in contact with the spacecraft panel. The transfer of heat depends on the parameters such as the surface finish, interface pressure, the types of materials involved in difficult to control and quantify. The way to increasing the conductivity through the interface surfaces include the use of synthetic mats or metallic, and the application of the thermal grease. This last solution has to be used with care because of the obvious potential contamination of difficulties [Incropera, F. P., 2006].
Heat pipes:
The heat pipe is a device that allows efficient transport for thermal energy. It consists of a metallic tube with the structure of capillary on the inner side and filled with the fluid. Heat is absorbs at one end by the evaporation of the fluid and releases at the other end by condensation of the vapour. The liquid is transported again back to the evaporator by the capillary forces [DeWitt, D.P., 1988].
The heat pipes commonly used on the spacecraft are an aluminium or ammonia type that allows optimal temperature control in the range of 0 to 40°C. The quantity of the heat transported by the pipe and it determined by its dimensions and design, the equivalent thermal conductance is constant and leading to the stable Conductance Heat Pipe [Holman, J. P., 1997].
Cooling loops:
For greater power dissipation or more stringent temperature requirements, other heat collection and transportation systems can be used. Various kinds of fluid loops have been proposed and applied to cope with these situations.
In single-phase loops, the refrigerating liquid absorbs the heat from the heat dispersing items by increasing its temperature, and transports it to the heat rejecting device where the fluid is cooled down. A mechanical pump is essential to provide the hydraulic energy needed for this process. The process of cooling loops, it has four types. There are Single phase loop, two phase hybrid loop, two phase capillary loop, and mechanically assisted two phase loop [Stoecker, W.F., 1980].
Thermo electric heat pumps:
Heat pumps have reversible mechanism that able to transfer the thermal energy from lower to higher temperature bodies using extra source of energy. Only this kind of heat pumps have been used in space, the basic feature of this pump is the Peltier element, and it’s the connection through the metallic tab of type p and type n semiconductor devices [Siegel, R., 1992].
These kinds of heat pumps are normally used for the control of tight temperature of the low power devices and the facilities used for microgravity equipments. Many systems have been used and developed for both manned and unmanned spacecraft [Modest, M. F., 2003].
References:
1. Gilmore, D.G., Satellite Thermal Control, 1994.
2. Donabedian, M., Spacecraft Thermal Control, 2002.
3. Karam, R.D., Satellite Thermal Control for Systems Engineers, 1998.
4. Martinez, I., System Engineering and Mission Analysis, 1992.
5. Wertz, J.R., Space Mission Analysis and design, 1999.
6. Fortescue, P., Spacecraft Systems Engineering, 2003.
7. Griffin, M.D., Space vehicle design, 1991.
8. Tribble, A.C., The space environment: implications for spacecraft design, 1995.
9. Incropera, F. P., Fundamentals of Heat and Mass Transfer, 2006.
10. Holman, J. P., Heat Transfer, 1997.
11. Stoecker, W.F., Design of thermal systems, 1980.
12. Siegel, R., Thermal Radiation Heat Transfer, 1992.
13. Modest, M. F., Radiative Heat Transfer, 2003.
14. DeWitt, D.P., Theory & practice of radiation thermometry, 1988.
No comments:
Post a Comment